The Floor

See where every unit is, open a station's queue, set up floor tablets, and start work orders.

On most floors, knowing where a job is means walking the line or asking around. Run draws your plant as a live map and shows where every unit is, so anyone can see what’s waiting, what’s stuck and what’s short, and open the station to work it.

#What it is

Run shows the plant as it was last promoted from your plant’s git repo (see Plant Git and Imports), so the floor always matches the version you released. A work order asks for a quantity of one part. It makes one or more units, which move through the stations on the part’s route.

Run has up to five tabs: Floor, Instructions, Training, Forms and Records. This page covers Floor. To work a unit, see Working a Station.

#Rules

  • Run is turned on per organization. See Feature Access and Billing. Training and Forms are turned on separately. While they’re off, their tabs don’t show.
  • Every role can open Run: Operator, View All, Editor and Owner. Everyone who can open Run can work stations.
  • Only Owners and Editors can create, renumber, archive and restore work orders.
  • A new work order uses the plant version that’s promoted when you create it, and stays on it.
  • Work order numbers are per organization. A new order takes the next number unless you type your own.
  • The floor updates live. When someone works a unit on another device, your map and queues catch up without a reload.

#In the app

#The floor map

Open Run › Floor. The Floor map draws your plant’s stations and stores, and how material flows between them.

Each station shows one number: the pieces of the units that are there now. The Map key calls this Units there. A station can also show:

  • short {count} in orange, when a part the station needs isn’t on hand.
  • Needs help in red, when a unit there is on hold.

Use the zoom buttons (Zoom in, Zoom out, Actual size, Fit height, Fit all) and Group levels to fold or open groups of stations. To focus on one area, click View {area} on its own. Click Whole plant to go back.

#The floor counts

Buttons above the map count the whole floor:

  • {work orders} · {units} in process opens a list of every unit in process.
  • {n} unassigned shows only when some units are at a place the map doesn’t draw. It opens the Not on the map list.
  • {count} needs help, in red, opens the list of units on hold.

#Highlight a work order or unit

Click Highlight and type a work order or unit number. The map lights up the stations its units are at and draws their route. Click Clear highlight to reset.

#Open a station

Click a station on the map. Its queue opens beside the map:

  • Units are grouped by work order. A unit on hold shows On hold.
  • Use Filter by work order or Filter by part to narrow the list.
  • Click Start {unit} to open the next unit at the station. Threaded picks the first unit that isn’t on hold.
  • Click Instructions to read this station’s instructions in Run › Instructions.

A store lists its stock by lot instead, with how much is on hand. See Stores and Finishing Work Orders.

#Start from a pull signal

If a station pulls parts from a store, Owners and Editors see Start from a pull signal. Click Start on a row. Threaded creates a work order for one card’s worth, plus work orders for any feeders that are short, then opens the unit at the station.

#Not on the map

Some units are at a place the map doesn’t draw, or at no place. Examples are units of a New part and parts that have no routing. They’re listed on Not on the map. You work them the same way you work a station queue.

#Create a work order

  1. In Run › Floor, click Create work order.
  2. In Part, search the plant’s parts by name or number. Parts are grouped into finished goods and subassemblies. If the part isn’t in the plant, choose New part: {number}.
  3. Enter Qty, a whole number from 1 to 10,000.
  4. Work order # shows the next number. Type over it to use your own.
  5. Optionally enter a Product reason, such as a customer PO.
  6. Leave Also create work orders for feeders that are short on to create orders for short feeder parts too. Threaded counts stock and work in process, rounds to lot sizes, and stops at kanban and supermarket stores. Feeder orders aren’t created for an order with its own number.
  7. Click Create work order.

The summary tells you whether the order Runs as individual units or Runs as one lot. A serialized part gets one unit per piece. A part that isn’t serialized gets one unit for the whole quantity.

A dot on Create work order with the tooltip Feeders are short means existing work orders are short of feeder parts. The dialog lists them under Current feeder shortages, each with its own Create work order button.

Feeder work orders are linked to the order they were created with. See Work Orders, Units and Records.

#Floor tablets and operator PINs

A tablet at a station can stay signed in for the whole shift while operators switch on it with a PIN.

  1. An Owner or Editor adds a shared member with the Floor role in Admin › People and roles, and signs the tablet in as that member.
  2. They set a 4-digit Operator PIN for each operator on the same page.
  3. On the tablet, operators see Who’s working?, tap their name and enter their PIN. The bar then shows Signed in as {name}, with Not you? Switch operator.

Every action is recorded under the operator who’s signed in. After about 10 idle minutes, the tablet goes back to the PIN screen.

Scanning a work order’s traveler QR code on a floor tablet asks for the operator’s PIN, then opens that work order. See Work Orders, Units and Records.

Floor tablets need operator PINs to be turned on for your organization.

#Training and Forms

When they’re turned on, Run › Training and Run › Forms show placeholders. Build and read Process Forms in Insights › Forms (see Insights Forms), and keep training in Training.

#If the floor is empty

If no plant version has been promoted yet, the map says No stations on this plant. Push and promote a commit first. See Plant Git and Imports.

#From the CLI or API

Use threaded api call with these operations. See What Run Exposes for the full list.

  • run_format_floor_map_retrieve and run_format_floor_summary_retrieve: the floor map, and the pieces and units at each place.
  • run_format_floor_units_list: units on the floor, filtered by place, state, work order or part.
  • run_format_active_work_orders_list: work orders still on the floor.
  • run_format_work_orders_create: create a work order. run_format_feeder_plan_retrieve shows the feeder orders it would need.